People who suffer from sleep apnea and/or asthma require sleeping with a breathing machine providing them with air all night. The air from the machine is administered to the lungs through a sealed CPAP mask which is snugly fit on the face. The air is force fed into the lungs by the machine when the person loses his or her breath or stops breathing completely.

It is important for someone who has been diagnosed with sleep apnea to sleep with this machine every night. It is not hard to use and does not require any expertise. Of course you must also be sure that there are no air leaks in it either.

A CPAP mask is equipped with a head strap, a face strap, the plastic element that holds these in place and the mouth and nose piece through which the air is pushed into the lungs from the machine. There are many different sizes and the person who will wear the mask must try on several of them to make sure that the one he or she buys has the best fit over his head and face.

It is also very important that the silicone gum piece that fits over the mouth and nose and provides the air seal be the right size. It must cover both comfortably and not interfere with the eyes. Air must flow into it effortlessly and it must not interrupt or interfere with normal sleep. These are the characteristics for a good fit.

Every compartment is lined with material that will absorb a certain amount of shock so you can use it as a carry on. Once you arrive at your destination, take it out from the bag immediately and check it thoroughly. Look at the hoses and make sure there are no creases and breaks on them. Once done with this, reassemble the mask making sure there is no damage to it either.

Both chin and head straps together must hold the soft plastic base in place without it being too loose or too tight. Remember that when you put your head sideways on the pillow, the soft plastic will be against your face. It is not necessary for it to be tight; it just has to be immobile. If you tighten the straps too much you can hurt your face and if your head strap is too tight you will cut blood circulation and possibly have a head ache.

Once you are sure that the vertical fit is fixed and that the mask will not move up and down; it is time to fix the horizontal cheek straps. The cheek straps will bring the silicone gum piece closer to your nose and mouth. They are used to seal any air leaks that might affect your mask. These must be adjusted with the unit on. If there are any air leaks it will give you an alarm.

Keep testing it until there is no leak alarm and you should be set to operate it properly. If it is the first time that you will use it, it is a good idea for you to test run it a few minutes while awake to make sure that all is well. If it is comfortable and fits snugly in place, you are ready for a good nights’ sleep.

MyCPAP machinesLife.com is a website dedicated to helping those who are living with Uk marriage visa sleep apnea stay happy and healthy on CPAP machines. Visit us to read your free report onUk marriage visa critical information you don’t know about your CPAP machines supplies.

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *