[I:http://www.articledir.org/wp-content/uploads/2010/07/KellyTurner2.jpg]In the event you have a swimming pool, you expect to swim in safe, clean sparkling water. A big part of reaching this is swimming pool care of the pool’s filter with regular back washing and periodic replacement. The pool also requires the focus of vacuum cleaners and attention with pool covers to stop significant amounts of debris and filth getting into the swimming pool. After these basics, balanced water is the crucial to the best swimmer experience.
The water is balanced in a swimming pool if the important constituents show up within the right range/scale. The pool chemicals that most need to be utilized or checked on a regular basis are:
* Sanitizers such as pool chlorine are crucial to kill bacteria, viruses and algae.
* PH adjusting chemicals stop the water becoming too alkali or too acidic
* Total alkalinity is a gauge of the amount of alkaline salts in a swimming pool. Calcium salts, especially, cause lime scale.
* Total dissolved solids. Whenever you add chemicals, they stay in the pool. When they build up significantly, you ought to change the water.
* Dissolved metals may be a problem with several water supplies and might require treatment with a product like ‘Metal Out’.
* Water clarifers help to keep water sparkling and clear.
* Algaecides may be used as a preventative or to correct sudden algae problems.
Pool Water Testing – Pool Cleaning
To keep a good eye on swimming pool chemicals you will need several ways of testing the concentrations in the water. The cheapest way is to use reagent chemical testing kits. You take a water sample, add a few drops of reagent and review the water color chart to measure the chemicals in the swimming pool. Test strips are less difficult to use and are the most typical way of examining water these days. There are also several meters accessible, often used along with test strips. Concentrations are generally measured in ppm (parts per million).
Pool Chemicals – Sanitizers
The most commonly used sanitizers are pool chlorine, bromine and biguanides. Pool chlorine is the most inexpensive but breaks down easily in sunlight and needs a stabilizer and frequent top ups. Bromine is more constant and won’t cause so much irritation to eyes and skin. Biguanides are the gentlest of the sanitizers. It is important never to blend Biguanides with pool chlorine or you will find the water becoming seriously discolored.
Pool Chemicals – pH
pH is a measure of the acidity or alkalinity of water. If water is too acidic it can gradually break down metal fittings in the plumbing. If it is too alkali it can imply that lime scale is deposited, perhaps blocking pipe work. A typical tool to lower pH is Muriatic Acid. Sodium bicarbonate is often applied to increase pH. You could also use a pH anchor to keep the pH in the appropriate range.
Pool Chemicals – Total Alkalinity
In the event you live in a location with hard water (high calcium salt concentration) you can use scale control products to combat scale build up but bear in mind these don’t mix with pH anchors. If your water hardness gets too high the only answer might be to change the swimming pool water, partially, at least. There are also products like ‘water hardness up’ that could be utilized if your water is too soft. Did you know you can use household baking soda as a less costly option? Water that is too soft will dissolve tile grout.
Pool Chemicals – Total Dissolved Solids
When the total dissolved solids gets above 2000 ppm you will have trouble balancing the water in a pool, regardless of how hard you try. For those who decide to decrease the TDS remember that you should never empty a swimming pool with a vinyl liner completely. The vinyl will shrink and when you refill, the vinyl won’t stretch back. It will tear.
[youtube:C6FdiJFbh1U;[link:Funny Pool Accidents];http://www.youtube.com/watch?v=C6FdiJFbh1U&feature=related]